Control Unit
The DCL control unit is used to expand the functions of the electric actuator, and can realize local control, remote control, and small-scale actuator array control.
Through the fieldbus interface, the electric actuator is connected to the fieldbus. When there are a large number of actuators, the wiring harness and deployment costs on site can be greatly reduced.
Through the IoT interface, the electric actuator is connected to the IoT via 4G/WIFI to realize remote monitoring, self-diagnosis and operation records of the electric actuator.
Through the DCL actuator IoT platform, low-density electric actuators can be controlled in a wide area to achieve flexible deployment.
Through the IoT + photovoltaic power generation unit, fluid control in remote areas without electricity can be achieved.
Control Unit
Actuator Diagnosis | Data Logging | Advance Maintenance | Asset Management
Fluid Control & Key Process Monitor
Per saperne di più >
Bus di campo
Modbus | CAN | Profibus | DeviceNet
HART | Ethernet | Foundation Fieldbus
Per saperne di più >
Process Control Panel
Fluid Process Control | Key Process Factor Set & Monitor
Easy-to-use HMI | Can connect to IIot
Per saperne di più >
