Manual do usuário do atuador DCL com FSR
Atuador DCL com Painel de Operação FSR Conexão P1: Alimentação DC24V + P3: Alimentação DC24V – P5: Entrada 4-20mA – P7: Entrada 4-20mA + P9: Saída 4-20mA – P11: Saída 4-20mA + P2: Entrada COM ON/OFF P4: Entrada ON/OFF Aberta P6: Entrada ON/OFF Fechada P8: Saída COM ON/OFF P10: Saída ON/OFF Aberta P12: Saída ON/OFF Fechada Botão KO: Usado no modo de configuração. Pressione este botão para abrir o painel de operação.
Manual de Aplicação Modbus do Atuador DCL (Versão Envision)
Service & Support The DCL series actuators support the Modbus-RTU protocol. By referring to this application manual, you can connect the DCL actuator to Modbus. Panel Description 1. Interface Definition P1: 220VAC Neutral (N) P2: 220VAC Live (L) P3: 4-20mA Input – P4: 4-20mA Input + P5: 4-20mA Output – P6: 4-20mA Output + […]
Manual do Usuário DC-FB3
The DC-FB3 module, when installed in the DCL electric actuator, allows for controlling the valve’s position using Modbus-TCP/IP. The installation is shown below: 1. Controlling DCL Electric Actuator via Modbus-TCP/IP Using Default Parameters The DC-FB3 is pre-configured in Client mode. Using the default MAC, IP, Gateway, Server, and Port parameters, you can control the […]
Manual do Usuário DC-FB1
The DC-FB1 is a USB to RS485 converter, enabling communication between a computer and a device using the RS485 protocol. This manual provides the necessary steps to get your DC-FB1 up and running, enabling you to communicate with RS485 devices from your computer. Here’s how to set it up: Connecting DC-FB1 to the Computer 1.Plug […]












