Separatoren på det kanadiske oljefeltet velger DCLs eksplosjonssikre elektriske aktuatorer, som har mer enn 10 års erfaring med bruksområder

Canada’s oilfields have extremely high environmental emission standards. A well-known separator manufacturer headquartered in Canada is using an “all-electric” technology approach to challenge the goal of zero emissions. In their solution, they chose the DCL explosion-proof electric actuator, which has over 10 years of oil and gas application experience. Zero Emissions Separator This separator uses […]

After using DCL electric actuators on ships for 15 years, the customer repurchased them

The DCL electric actuator on the ship has been used for 15 years The DCL after-sales department received an after-sales email, which listed several photos of DCL actuators. Through these photos, it was initially judged that these actuators were manufactured before April, 2008. The customer asked the after-sales staff in the email: “Is the actuator […]

DCL explosion-proof electric actuator for jerell fracturing equipment

Fracturing Equipment Jerell is a leading global manufacturer of complete fracturing equipment: The only Chinese supplier providing complete shale gas fracturing equipment to North America The world’s first high-power turbine fracturing equipment for oil and gas field development The world’s first electric-driven fracturing equipment and shale gas development solution Jerell Official Website: https://www.jereh.com/ DCL Explosion-Proof […]

DCL Supplies Electric Actuators for the World’s Largest Cooling Capacity Chiller – WLT4000RT

WLT4000RT On November 12, 2023, McQuay delivered the world’s largest single-unit cooling capacity air conditioning system – WLT4000RT. DCL was honored to participate in this world-class project by supplying electric actuators. The WLT4000RT is a negative pressure refrigerant centrifugal unit, measuring 13 meters long, 4 meters wide, 4 meters high, and weighing approximately 40 tons. […]

Bruk av IoT til å overvåke og analysere intermitterende aktuatorfeil

Customer Feedback: The Three-Way Valve in the Cooling System Failed to Reach the Designated Position A nuclear power customer reported an intermittent failure of the actuator. Specifically, after the control system issued an opening command via a 4-20mA signal, the actuator’s feedback position remained unchanged. Upon cutting off the power and inspecting the site, the […]

DCL-250 Actuator Runs Fault-Free for 10 Years

Customer Reached Out to Us Again A customer contacted us to place a new order for electric actuators. However, the nameplates on the previously installed actuators had been corroded, making it impossible to identify the product model. The customer sent site photos for model confirmation. 13 Years of Reliable Operation with DCL-250 Actuators After analyzing […]