Compare parameters between DCL explosion-proof actuators
| Model | Angolo di oscillazione | Coppia/Tempo di funzionamento | Duty Type | Tensione di alimentazione | Segnale di ingresso/uscita | Additional Option |
|---|---|---|---|---|---|---|
| DCL-Ex05 | 0 - 360 ° | 50 Nm/20 secondi Opzionale con 20 Nm/4S 30 Nm/10 s 50 Nm/60 secondi | ON - OFF Modulazione Avanzamento graduale - Posizionamento | 24 V CC 24 V CA 110 V CA 220 V CA AC380V | 4-20 mA 0-10V Interfaccia I/O Optional with field bus Modbus-RTU Modbus-ASCII CAN Ethernet | Over torque protection Fail Safe Return Deumidificazione Bus di campo |
| DCL-Ex10 | 0 - 90 ° | 100 Nm/30 secondi Opzionale con 50 Nm/15S 100 Nm/60 secondi | ON - OFF Modulazione Avanzamento graduale - Posizionamento | 24 V CC 24 V CA 110 V CA 220 V CA AC380V | 4-20 mA 0-10V Interfaccia I/O Optional with field bus Modbus-RTU Modbus-ASCII CAN Ethernet | Over torque protection Fail Safe Return Deumidificazione Bus di campo |
| DCL-Ex20 | 0 - 90 ° | 200 Nm/30 secondi Opzionale con 100 Nm/15S 200 Nm/60 secondi | ON - OFF Modulazione Avanzamento graduale - Posizionamento | 24 V CC 110 V CA 220 V CA AC380V | 4-20 mA 0-10V Interfaccia I/O Optional with field bus Modbus-RTU Modbus-ASCII CAN Ethernet | Over torque protection Fail Safe Return Deumidificazione Bus di campo |
| DCL-Ex40 | 0 - 90 ° | 400 Nm/30 secondi Opzionale con 200 Nm/15S 400 Nm/60 secondi | ON - OFF Modulazione Avanzamento graduale - Posizionamento | 24 V CC 110 V CA 220 V CA AC380V | 4-20 mA 0-10V Interfaccia I/O Optional with field bus Modbus-RTU Modbus-ASCII CAN Ethernet | Over torque protection Fail Safe Return Deumidificazione Bus di campo |
| DCL-Ex60 | 0 - 90 ° | 600 Nm/45S | ON - OFF Modulazione Avanzamento graduale - Posizionamento | 24 V CC 110 V CA 220 V CA AC380V | 4-20 mA 0-10V Interfaccia I/O Optional with field bus Modbus-RTU Modbus-ASCII CAN Ethernet | Over torque protection Fail Safe Return Deumidificazione Bus di campo |
Recommend actuator to drive a butterfly valve
Recommend actuator to drive a Ball valve
Recommend actuator to drive a ventilation valve
Recommend valve to be driven by DCL explosion-proof actuator
Note: The recommendations in the above table is for reference only in common application scenario, the specific torque needed to drive the valve is depended up on the real application case.
It is recommended to choose an actuator with 1.1-1.3 times of torque than the value that was finalized after evaluation of torque requirement of valve and liquid pressure in the pipe. This would improve the robust performance in most worst case.
View actuators with different torque
50 Nm/20 secondi
————————–
Opzionale con
20 Nm/4S
30 Nm/10 s
50 Nm/60 secondi
100 Nm/30 secondi
————————–
Opzionale con
50 Nm/15S
100 Nm/60 secondi
200 Nm/30 secondi
————————–
Opzionale con
100 Nm/15S
200 Nm/60 secondi
400 Nm/30 secondi
————————–
Opzionale con
200 Nm/15S
400 Nm/60 secondi












