How to Set Up an ON-OFF Electric Valve?
1. Adjusting the Fine-Tuning Electrical Limit Full Close Adjustment: Use the handle to drive the valve to the fully closed position. Loosen the scale plate locking screw and adjust the scale plate so that the pointer aligns with the 0 mark (SHUT direction). Then, tighten the screw. Using a 2mm hex wrench, turn the closing […]
Wie wird der Stellantrieb auf das Ventil montiert?
Installation Steps Manually rotate the valve to check for any abnormalities and ensure the valve is in the fully closed position. Secure the mounting bracket onto the valve. Fit one end of the coupling onto the valve stem. Manually drive the electric actuator to the fully closed position (pointer aligned with SHUT or zero-degree marking) […]
Wie wählt man einen geeigneten bürstenlosen DC-Motor aus?
我在产品设计中，需要使用无刷电机了。 网上各种型号的参数表太分散了，难道没有一款包含所有型号参数的对照表吗？ 有的，这张表正是你需要的。
Why Do Some Actuators Need Explosion Protection?
1. What is an Explosion? An explosion occurs when flammable substances mix with oxygen and ignite under certain conditions. If the reaction speed exceeds the speed of sound, it results in a destructive explosion wave. 2. What is Explosion Protection? To prevent explosions, at least one of the three key factors must be controlled: […]
Ventilation Butterfly Valve Torque Reference Table
Are you still struggling to determine the torque for ventilation butterfly valves? With this table, you can quickly find out the required actuator torque for butterfly valves of different pipe diameters. Note: This data applies to most ventilation butterfly valves and can be used as a design reference. When selecting a butterfly valve manufacturer and […]
