DCL Aktüatör ve FSR Kullanım Kılavuzu
FSR Çalıştırma Paneli Bağlantılı DCL Aktüatör P1: DC24V Güç + P3: DC24V Güç – P5: 4-20mA Giriş – P7: 4-20mA Giriş + P9: 4-20mA Çıkış – P11: 4-20mA Çıkış + P2: Açma/Kapama Giriş COM P4: Açma/Kapama Giriş Açık P6: Açma/Kapama Giriş Kapalı P8: Açma/Kapama Çıkış COM P10: Açma/Kapama Çıkış Açık P12: Açma/Kapama Çıkış Kapalı Düğme KO: Ayar modunda kullanılır. Bu düğmeye basarak […]
DCL Aktüatör Modbus Uygulama Kılavuzu (Envision Sürümü)
Service & Support The DCL series actuators support the Modbus-RTU protocol. By referring to this application manual, you can connect the DCL actuator to Modbus. Panel Description 1. Interface Definition P1: 220VAC Neutral (N) P2: 220VAC Live (L) P3: 4-20mA Input – P4: 4-20mA Input + P5: 4-20mA Output – P6: 4-20mA Output + […]
DC-FB3 Kullanım Kılavuzu
The DC-FB3 module, when installed in the DCL electric actuator, allows for controlling the valve’s position using Modbus-TCP/IP. The installation is shown below: 1. Controlling DCL Electric Actuator via Modbus-TCP/IP Using Default Parameters The DC-FB3 is pre-configured in Client mode. Using the default MAC, IP, Gateway, Server, and Port parameters, you can control the […]
DC-FB1 Kullanım Kılavuzu
The DC-FB1 is a USB to RS485 converter, enabling communication between a computer and a device using the RS485 protocol. This manual provides the necessary steps to get your DC-FB1 up and running, enabling you to communicate with RS485 devices from your computer. Here’s how to set it up: Connecting DC-FB1 to the Computer 1.Plug […]












