Installeren en gebruiken

5 steps to start using DCL actuator Install actuator onto the valve Check mechanical limiter Wiring Set end-position of Open/Close Start to Use How-tos View More > Application Notes View More > User Manual View More > Previous：FAQ Next：5 Steps to Start Using DCL Actuator

Technische documentatie van de DCL-actuator

Normen (ISO/GB/EU) Meer bekijken > Technische artikelen Meer bekijken >

Onderhoud en reparatie van de DCL-actuator

Veelvoorkomende fouten en probleemoplossing voor aan/uit-actuator voor modulerende actuator voor DC24V-actuator voor DCL-02. Meer informatie >

Hoe stel ik de hysteresis van de actuator in?

Setting the hysteresis allows the actuator to better match PID closed-loop control applications. Steps to Set the Hysteresis: Turn the S-A switch (highlighted in the red box below) to position 2. Rotate the adjustment knob (highlighted in the yellow box) to set the hysteresis. Each scale mark represents 0.5%. The adjustable hysteresis range is 0.5% […]

Welke soorten kleppen kunnen door DCL elektrische actuatoren worden aangestuurd?

The DCL electric actuator is mainly used to drive butterfly valves with a diameter of less than 600mm, ball valves with a diameter of less than 350mm, and ventilation dampers and air flap valves with a diameter of less than 1200mm. Beyond these applications, some interesting use cases are also worth noting. For example: Rotating […]

Hoe werkt een elektrische actuator?

Once connected to a power supply (AC380V, AC220V, AC24V, or DC24V), DCL electric actuators can be controlled by a Distributed Control System (DCS) using various control signals, including analog signals, digital signals, bus communication, and IoT networks. The actuator drives the electric valve to fully open, fully close, or adjust to a specified position, enabling […]

Waarom kiezen voor een elektrische actuator?

An electric actuator utilizes a motor-driven reduction mechanism to achieve both rotary and linear motion of a valve. Since it is powered by a motor, the electric actuator features a simple and reliable structure without requiring additional support systems like pneumatic or hydraulic sources. This results in higher energy efficiency and lower operational costs. At […]

Technische artikelen

5 stappen om de DCL-actuator te gaan gebruiken

1. Install actuator onto the valve Turn the valve in fully closed position. Install the bracket on the valve. Connect the coupling on the valve shaft. Drive the actuator to the fully closed position with manual handle. Insert the actuator output shaft into the square hole of the coupling. Tighten the connecting between these parts. […]

How-tos of DCL Actuator

Previous：5 Steps to Start Using DCL Actuator Next：User Manual of DCL Actuator