Panduan Pengguna Aktuator DCL dengan FSR
Aktuator DCL dengan Panel Operasi FSR Koneksi P1: Daya DC24V + P3: Daya DC24V – P5: Input 4-20mA – P7: Input 4-20mA + P9: Output 4-20mA – P11: Output 4-20mA + P2: Input ON/OFF COM P4: Input ON/OFF Terbuka P6: Input ON/OFF Tertutup P8: Output ON/OFF COM P10: Output ON/OFF Terbuka P12: Output ON/OFF Tertutup Tombol KO: Digunakan dalam mode pengaturan. Tekan tombol ini untuk membuka […]
Manual Aplikasi Modbus Aktuator DCL (Versi Envision)
Service & Support The DCL series actuators support the Modbus-RTU protocol. By referring to this application manual, you can connect the DCL actuator to Modbus. Panel Description 1. Interface Definition P1: 220VAC Neutral (N) P2: 220VAC Live (L) P3: 4-20mA Input – P4: 4-20mA Input + P5: 4-20mA Output – P6: 4-20mA Output + […]
Panduan Pengguna DC-FB3
The DC-FB3 module, when installed in the DCL electric actuator, allows for controlling the valve’s position using Modbus-TCP/IP. The installation is shown below: 1. Controlling DCL Electric Actuator via Modbus-TCP/IP Using Default Parameters The DC-FB3 is pre-configured in Client mode. Using the default MAC, IP, Gateway, Server, and Port parameters, you can control the […]
Panduan Pengguna DC-FB1
The DC-FB1 is a USB to RS485 converter, enabling communication between a computer and a device using the RS485 protocol. This manual provides the necessary steps to get your DC-FB1 up and running, enabling you to communicate with RS485 devices from your computer. Here’s how to set it up: Connecting DC-FB1 to the Computer 1.Plug […]












